1.1 GENERAL
Please note: These technical specifications correspond to XO FLOW version 1.1.
As described below XO FLOW is an upgradable platform and various software upgrades, new functions and new instruments are planned.
XO FLOW (REF FL-001) is a digital dental unit platform with workflow guidance and dental apps.
Over-the-patient delivery unit with balanced instruments for working:
- Right-handed in duo – or solo
- Left-handed in duo – or solo
The unit is fitted with:
- a built-in computer
- a network connection (the network connection will be active in a future software version – see details here).
- Dashboard: Touch activated graphical user interface for dentist and chairside assistant – integrated with the instrument bridge – for controlling and monitoring the unit and attached instruments
- Navigator: Touch sensitive screen with dental apps
Integration with other dental devices and software solutions connected to the network (available in a future software version – see details here).
Multi-user network solution – where all users can access their own settings from any unit in a network (available in a future software version – see details here).
20 years’ service life – see details here.
XO FLOW characteristics:
- Upgradable
- Design based on standardized technologies, components and platforms
- Instrument modules
- Dashboard and Navigator prepared for new display panels
- Built-in computer may be upgraded to new computer generations
- Designed with smooth and easy-to-clean surfaces. Metal parts painted using an antimicrobial powder coat – a combination of agents with nanoscale silver gives a long-term protection against formation of bacteria and fungi on the surfaces.
Only materials and components of highest quality are used.
All materials in contact with patient and/or operator are in accordance with EN ISO 10993-1 (biological evaluation of medical devices).
Designed and manufactured in Denmark.
Two design awards:
- Red Dot, winner 2021, Medical devices and technology
- Red Dot, winner 2021, Innovative products
Please note: XO FLOW Patient chair must be ordered separately!
XO FLOW unit with lifting mechanism for XO FLOW patient chair – incl. all features described in section 1 (FL-001)
1.2 INSTRUMENT BRIDGE
Centrally placed instrument bridge with integrated Dashboard:
- Touch activated 17” HD screen
- Laminated, anti-reflex “Gorilla” glass fitted with a protective steel frame
Up to six instrument modules:
- of any type
- and in any order
- may be fitted into the instrument bridge
The instrument bridge features:
- Individually balanced instrument suspensions
- Force to move the instrument bridge corresponds to: 400 g – 1,500 g
- Shielded” unit instruments (instrument tips cannot touch patient’s chest)
- Detachable instrument and hoses
- Detachable instrument suspensions
- Detachable instrument holder fitted with magnets
- Detachable instrument holder pad
- Optional Dashboard protection foil (see details here)
Please note: If less than 6 instrument modules are attached, one or more blind modules (see section 3.6) must be fitted.
1.3 INSTRUMENTS
Each instrument consists of:
- Instrument with hose and plug
- Instrument module with electronics and valves etc. needed to control the instrument
Advantages of using instrument modules:
- Instruments may be positioned in any sequence
- Electrical fault confinement meaning increased uptime
- Easy field replacement of defective modules
1.4 DASHBOARD
Dashboard with graphical user interface for monitoring and controlling unit instruments for both dentist and chairside assistant with:
- Side buttons for (right-handed) dentist (1) – of which eight are configurable – for controlling unit and patient chair
- Side buttons for chairside assistant (or left-handed dentist) (2) – of which eight are configurable – for controlling unit and patient chair
- Six instrument control windows (3) – one for each instrument – operated with one-motion-control (little finger of instrument holding instrument)
- Six instrument displays (4) (one for each instrument depending on the situation):
- Icon and name of instrument
- Maximum or actual value of the primary parameter (e.g. speed) and if applicable the secondary parameter (e.g. torque)
- Name of preset
- Selection of contra angle, bur etc. to match preset
- Name of workflow and step incl. parameters (e.g. exposure time and radiant exitance)
- Six instrument selection indicators (5)
- Information bar (6) with time, name of current operator, name of operatory and notifications (if any)
- Asepsis control menu at shutdown and start up
- Lock Dashboard function for cleaning of Dashboard
- Texts in EN, DE, FR, and DK
Each instrument control window may assume up to four different states:
- Closed
- Preset
for selection of optimal instrument settings (e.g. speed, torque, spray) targeted at performing a specific procedure (e.g. preparation of a filling or excavation) with one tap
- Up to eight presets per type of instrument
- Standard presets
- Individually configurable presets
- Workflow
for execution of a sequence of steps with optimal instrument settings in each step for:
- Composite restorations
- Endo preparation
- Standard workflows
- Configurable workflows (using the Administration app)
- Adjustment
with sliders and buttons for monitoring and adjusting instrument settings
- Six-way syringe:
- Heating element on/off
- Air instrument (turbine):
- (Maximum) speed
- Spray water: On/off and amount of spray water
- Spray air: On/off and amount of spray air
- Automatic chip blow: On/off
- Micromotor:
- (Maximum) speed
- Spray water: On/off and amount of spray water
- Spray air: On/off and amount of spray air
- Tactile function (limitation of torque): on/off
- Automatic chip blow. On/off
- Ultrasonic scaler:
- (Maximum) amplitude
- Irrigation water: On/off and amount of spray water
- Composite curing light:
- Radiant exitance
- Exposure time
- Intraoral camera:
- Camera mode
- Video mode
- Rotate image
1.5 FOOT CONTROL
Foot control that is easy to understand and use with:
- Pedal (1) for start/stop and if relevant adjusting the primary instrument parameter
- Joystick (2) for operating patient chair
- X (3) and O (4) buttons for operating programable chair positions
- Six-way syringe:
Configuration: Function of pedal, joystick, X and O buttons may be configured individually – to for example resemble the function of classic XO/FLEX units.
Floor cleaning position: Rilsan® coated foot control hanger.
1.6 NAVIGATOR
Touch activated 17” HD screen with laminated, anti-reflex “Gorilla” glass fitted with a protective steel frame with a long articulating arm for positioning Navigator:
- on both sides of the Dashboard
- in desk position
-
in a patient viewing position
always within the field of peripheral vision
The Navigator is equipped with:
- Detachable handles
- Home page (1) with apps (2)
- Home button (3)
- Virtual keyboard
- Information bar (4) with time, name of current operator, name of operatory and notifications (if any)
- Texts in EN, DE, FR and DK
1.7 DENTAL APPS
Administration app
- Access is pin code protected
- Create and delete users
- Configuration of
- Instrument workflows
- Dashboard side buttons
- Power settings
- Cup filler and cuspidor
- Time and date
- Language
- Treatment room name
- Sound and volume
User settings app
- Configuration of user settings:
- Instrument presets
- Instrument settings
- Foot control
- Programable patient chair positions
- Light
- Power
- Cup filler and cuspidor
- Automatic functions (for example automatic cuspidor flush when chair reaches programmed position)
- User settings are automatically replicated to and accessible in all XO FLOW units connected in a network2
Select user app
- Each user can retrieve own unit and instrument settings on all XO FLOW units connected in a network2
- Unlimited number of users
Remote desktop app
- The remote desktop app makes it possible to use the Navigator for displaying and interacting with a remote Windows computer connected to the same network (but not necessarily in the same room) as the unit
- This includes, but is not limited to, PMS systems, imaging system and scanning software. See details here.
Instrument workflow app
- Selection of instrument workflows for:
- Micromotors – endo workflows
- XO ODONTOCURE – composite restorations
Help app
- Instruction for use
- Short introduction videos on how to sit well, see well and work well – at the same time
- Short videos showing how not to work with XO FLOW
- Infections control workflow videos
- How replace consumables
Ergonomics guide app
- Instruction on how to position patient and operators in relation to tooth/tooth surface to be treated to sit and see well – at the same time
Status app
- Notifications
Asepsis app
- Manual activation of water and suction line disinfection procedures
Technical settings app
- Setup of the unit (access for authorized service personnel only)
1.8 ARMS
Arms for instrument bridge, Navigator, and operating light are pivoting on one vertical column.
All arms:
- Are manufactured in aluminum and connected via slim joints with roller bearings
- Have adjustable and maintenance-free balance spring and friction brakes for smooth and effortless operation
- Have steel covers fitted with magnets
1.9 UNIT STAND
The unit stand:
- Is manufactured in steel and aluminum
- Has service panels for easy access to XO Water disinfection, XO Suction disinfection, and auxiliary connections
- Has detachable aluminum side covers for easy service access
- Has buttons located on the top of the unit stand for patient activation of cuspidor flush and cup filler (not for units without cuspidor and cup filler)
1.10 CUSPIDOR AND CUP FILLER
The cuspidor is fitted with:
- A detachable and thermodisinfectable cuspidor bowl in glass with a gold trap
- A protection disc
- A stainless-steel faucet:
- For efficient rinsing of cuspidor bowl
- With swivel function and automatic cut off of water supply for easy removal of cuspidor bowl for cleaning
Rinsing time cuspidor: 5- 30 seconds
Gold trap mesh size: < 2 mm
The cup filler includes:
- A detachable and thermodisinfectable cup holder
- A stainless-steel faucet for cup filler
Amount of water to cup filler: 10 – 30 cl
Please note: XO FLOW is available without cuspidor and cup filler, see details here.
1.11 WATER SYSTEM
The unit’s water system includes:
- A main water valve for automatic switching incoming water on/off
- A filter for incoming water (50 μm)
- Maximum inlet water conductivity: 850 µS/m
- Media separated solenoid valves for high uptime and low service costs
- Servo control of solenoid valves for spray/irrigation water, flowmeter diameter 0,7 mm
- Fittings approved for use in the food industry
- Water container with backflow prevention ensuring a vertical air gap of 20 mm to prevent procedural water from flowing back into the municipal water supply system
- Leakage sensor providing automatic shut-off of water supply if an internal water leak is detected
- Integrated water softener:
- Decarbonizes water
- Protects internal components by reducing the limescale content
- Improves taste of water
- Water cartridge replacement notification to the Navigator
- Water softener cartridge accessible via service panel and replaceable without use of tools
1.12 CONTROL OF WATER AND SUCTION DISINFECTION
- In the evening:
- Water is emptied from the water system
- Disinfection of suction
- After about 10 minutes the unit shuts down automatically
- In the morning:
- Automatic disinfection of the water system
- The intensity depends on the time elapsed since the last successful disinfection cycle
- The unit will be ready for use after about 10 minutes depending on the instrument configuration
Manual function:
- In addition to the automatic function, water disinfection procedures and flushing of the unit’s water lines with water may be managed using the Asepsis app.
Notification:
- Replacement notifications concerning XO Water disinfection cartridges and XO Suction disinfection cartridges shown on the Navigator.
1.13 XO WATER DISINFECTION
XO Water disinfection system:
- Keeps the number of microorganisms in the unit at a level suitable for drinking water
- Hinders limescale from forming by binding the calcium carbonate
Function:
- Continuously dispenses a solution of non-toxic disinfectant containing hydrogen peroxide to the procedural water
- Automatic two-step procedure in the evening and in the morning (see details here).
- Quick replacement by the users of the disinfection cartridge holder through a service panel
Supplied with an instrument-disinfection-holder.
For details concerning XO Water disinfectant go here.
Please note: XO Water disinfection cartridges must be ordered separately.
1.14 ELECTRONICS AND SOFTWARE
Hardware:
- Mains switch at the base of the unit stand
- Easily accessible on/off switch at the rear side of the unit stand
- Integrated computer
- CAN bus architecture that ensures high product reliability
- LAN/internet connection: Two wired ethernet ports
- One external USB port making it possible to connect electronic devices to an external computer connected to the port (usually power specifications for USB are 5 V and 500 mA)
- Two internal USB ports connected to the unit’s internal computer to be used for accessing the computer (for authorized service personnel only)
- 230 V mains socket incl. an extension cord (2,5 meters, IEC 60320-2-2/E style connector C14G) for supplying power (maximum 500 VA) to external devices like for example XO ODONTOSURGE
- Extensible hardware platform
Software:
- Windows 10 based
- Shutdown switch on Dashboard
- Automatic and configurable stand-by mode
- Configurable automatic power down function
Remote support:
From the administration app it is possible to establish a connection from the unit to a remote computer via TeamViewer (see “TeamViewer – The Remote Connectivity Software”).
The remote connection can be used to e.g.:
Guide the end customers in setting up and using the unit
- Inspect the unit
- Overview of the units’ correct functioning
- Study notifications
- Update software
See further details here.
Please note:
In Norway, remote access may not be available due to “Helsenett” restrictions.
1.15 AIR SYSTEM
The unit’s air system includes:
- Main air valve: Automatic switching incoming air on/off
- Filter for incoming air (5 μm)
- Sensors for monitoring pressure
1.16 INSTALLATION REQUIREMENTS
Minimal room size (XO FLOW unit + XO WORKTOP):
- Width: 200 cm (recommended 220 cm)
- Length: 300 cm (recommended 320 cm)
- Ceiling height: > 230 cm (recommended 255 cm)
Electrical and other installation requirements:
1.17 MAINTENANCE AND TECHNICAL SERVICE
XO FLOW is to be maintained as prescribed in Instructions for service here.
When it is time for service, a service notification is shown on the Navigator.
One month after the installation a first service checkup should be done by a certified technician.
After that preventive service checkup is to be performed by a certified technician at intervals of 24 months.
Service each 2nd year
Including checkup and exchange of parts contained in the bi-yearly service kit – expected labor time: 1.75 hours.
Service each 6th years
6 years, 12 years and 18 years after installation a service checkup and exchange af parts contained in 6-years service kit is necessary in addition to the work related to the bi-yearly service.
1.18 ENVIRONMENTAL REQUIREMENTS
Operating conditions:
- Temperature: +15oC – +35oC
- Relative humidity: 20% – 95%
- Air pressure: 700 hPa – 1060 hPa
- Installation altitude: Max. 2,000 meters above sea level
Transport and storage conditions:
- Temperature: -40oC – +70oC
- Relative humidity: 10% – 95%
- Air pressure: 700 hPa – 1060 hPa
1.19 COLORS
Color of unit base: XO Silver (IGP 6802/gloss 20).
Color of unit column: XO Silver (IGP 6802/gloss 20), Traffic white (RAL 9016/gloss 20).
Color of stand, arms for bridge, light and screen, instrument bridge and operating light: Traffic white (RAL 9016/gloss 20).
Color of handles, instrument bridge pad, suction, foot control and other details: Black grey (RAL 7021).
Please note: Minor differences in color of different parts of the product may occur due to different materials and different paint processes.
Please note: Exposure to sunlight may change colors over time.
Traffic white (RAL 9016/gloss 20) (XB-935) with column in XO Silver (IGP 6802/gloss 20)
IGP 6802
RAL 9016
RAL 7021
Note: Slight color differences may occur.
1.20 UPGRADABLE PLATFORM
XO FLOW is a platform for the future, prepared for
• Surgical motor module
• Peristaltic pump
• Instrument workflows for implants
• Timer and alarm app
• User statistics app: E.g., number of patients and duration of treatments
• Extended workflow-solutions
• Remote software update
• Apex locator
2 XO FLOW PATIENT CHAIR
2.1 GENERAL
XO FLOW Patient chair is attached to the side of the unit stand with vertical lift:
- Maximum legroom for dentist and chairside assistant for both right-handed and left-handed operation
- Patient’s head always in same horizontal position
The chair has:
- A backrest with integrated elbow supports
- A double articulated neck rest
- Two servo motors with speed control:
- “Soft start” for improved patient comfort
- Low noise
- Electric limit switches
- A load cell:
- Patient detector switch
- Automatic collision stop
- Programmable positions for each user:
- Working position 1
- Working position 2
- Entry position
Height above floor: 51 – 105 cm – measured from floor level to the top of the seat.
Maximum patient weight: 150 kg.
Duty cycle motors: 25 seconds on – 400 seconds off.
XO FLOW Patient chair (AP-680)
Please note: Cushions must be ordered separately.
Please note: XO FLOW is not available without patient chair.
2.2 COLOR OPTIONS FOR BASE OF PATIENT CHAIR
Standard XO Patient chair is supplied in a color corresponding to the unit stand:
Traffic white (RAL 9016/gloss 20) (XB-931)
Optional patient chair colors:
Black grey (RAL 7021/gloss 5) (XB-937)
Mouse grey (RAL 7005/gloss 5) (XB-943)
Silk grey (RAL 7044/gloss 5) (XB-946)
Pale brown (RAL 8025/gloss 5) (XB-945)
Chocolate brown (RAL 8017/gloss 5) (XB-939)
Coral red (RAL 3016/gloss 5) (XB-940)
Ultra-marine blue (RAL 5002/gloss 5) (XB-941)
Please note: Minor differences in color of different parts of the product may occur due to different materials and different paint processes.
Please note: Exposure to sunlight may change colors over time.
Please note: Delivery time for patient chairs in colors other than Traffic white is at least 8 weeks.
Black grey
Mouse grey
Silk grey
Pale brown
Chocolate brown
Coral red
Ultra-marine blue
2.3 CUSHIONS FOR PATIENT CHAIR
The patient chair is available with standard cushions or in a “soft” version with very soft, comfortable cushions with sewn stitches.
The patient chair is upholstered with XO Comfort fabric with a high-friction comfortable surface that allows the skin to breathe. Skai fabric is also available. XO Comfort fabric complies with the requirements listed in ISO 6875 Dentistry – Patient chair.
Please note: The fabric must be in accordance with “ISO 6875 Patient Dental Chair” concerning resistance to liquid absorption and flammability.
Standard cushions (AR-261)
Soft cushions (AR-262)
Alternatively, a patient chair with soft cushions may be supplied without fabric, prepared for upholstering by the customer. Dimensions required: 140 cm x 200 cm.
Soft cushion for patient chair supplied without fabric, prepared for upholstering by customer (XO-840)
2.4 FABRIC COLORS FOR XO FOR PATIENT CHAIR
XO Comfort fabric colors:
Black grey (RAL 7021) (XB-150)
Mouse grey (RAL 7005) (XB-151)
Silk grey (RAL 7044) (XB-158)
Pale brown (RAL 8025) (XB-157)
Chocolate brown (RAL 8017) (XB-155)
Coral red (RAL 3016) (XB-152)
Ultra-marine blue (RAL 5002) (XB-153)
See colors in section 2.1.
Skai fabric colors:
Dark blue (XB-131)
Light grey (XB-132)
Warm grey (XB-133)
Dark blue
Light grey
Warm grey
2.5 ACCESSORIES FOR XO PATIENT CHAIR
Child cushion with adjustable knee support with skai upholstery.
Child cushion, Grey skai (XO-813)
3.1 SYRINGE
3.1.1 Syringe module
Spray water: 20 – 100 ml/min ± 20%
Spray air: 10Nl/min (adjustable)
Syringe module, supplied without syringe (FL-100)
Please note: The syringe must be ordered separately.
3.1.2 Luzzani three-way syringe
Hose with plug for instrument module.
- Spray
- Air
- Water
Luzzani three-way syringe with hose, for syringe module FL-100 (FL-101)
3.1.3 Luzzani six-way syringe
Hose with plug for instrument module
- Spray
- Air
- Water
- Heated / non heated
- Maximum power loading: 103 W
- Intermittent operation: 10 seconds on and 20 seconds off
Luzzani six-way syringe (heated) with hose, for syringe module FL-100 (FL-102)
3.2 AIR INSTRUMENT (TURBINE)
3.2.1 Air instrument module
- Turbine
- Air scaler or
- Other drive air powered instrument
- Speed (power) control:
- One-step or
- Variable in range 10 – 100 %
Drive air flow: 55 nl/m; 3,2 bar.
Return air pressure: 0,3 bar – vented in instrument bridge to minimize backpressure and improve performance.
- Electronically controlled in the range: 20 – 60 ml/min ± 20 % depending on the dimensions of the spray pipes in the attached instrument
- Membrane separated proportional solenoid valves
- Electronically controlled in the range: 10 – 100 % of maximum
- Proportional solenoid valves.
- Double blast of high-pressure chip air each time the instrument stops
- May be switched off/on
Air instrument (turbine) module, supplied without hose (FL-110)
Please note: The hose must be ordered separately.
3.2.2 Hose for air instrument
- Plug for instrument module
- ISO 9168, type 3b connector
- LED light connection
- Air instrument module FL-110
- Micromotor module FL-111
Air instrument (turbine) hose with connector (ISO 9168 type 3b), for modules FL-110 and FL-111 (FL-112)
3.3 MICROMOTOR
3.3.1 Micromotor module
- Bien-Air MX2 micromotor,
- Turbine,
- Air scaler or
- Other drive air powered instrument
- Speed (power) control:
- One-step or
- Variable in the range:
- MX2 Micromotor: 100 – 40.000 RPM + 10%
- MCX Micromotor: 1.000 – 40.000 RPM + 10%
Return air pressure: 0,3 bar – vented in instrument bridge to minimize backpressure and improve performance.
Cooling air: 10 l/min.
- Reduced torque for use when excavating
- Configurable
- May be switched off/on
- Continues function with torque limitation and auto-forward/auto-reverse function
- Reciprocating endo feature (see section 3.3.3)
- Electronically controlled in the range: 20 – 60 ml/min ± 20% depending on the dimensions of the spray pipes in the attached instrument
- Membrane separated proportional solenoid valves
- Electronically controlled in the range: 10 – 100% of maximum
- Proportional solenoid valves
- Double blast of high-pressure chip air each time the instrument stops
- May be switched off/on
Micromotor and air instrument (turbine) module, supplied without hose and micromotor (FL-111)
Please note: The micromotor and/or air instrument hose must be ordered separately.
3.3.2 Bien-Air MX2 micromotor
Brushless micromotor.
Torque (handpiece gear ratio 1:1): 3,5 Ncm.
- Clockwise
- Counterclockwise
Endo function.
Handpieces according to ISO 3964 with internal spray.
LED light.
Hose:
- rotation (+ 200o)
- plug for instrument module
May be used with micromotor module FL-111.
Bien-Air MX2 micromotor with hose (rotation + 200o), for module FL-111 (FL-118)
3.3.3 Bien-Air MCX LED micromotor
Brushless micromotor.
Torque (handpiece gear ratio 1:1): 2,6 Ncm.
Direction of rotation:
- Clockwise
- Counterclockwise
Handpieces according to ISO 3964 with internal spray.
LED light.
Hose:
- rotation +200o
- plug for instrument module
May be used with micromotor module FL-111.
Bien-Air MCX micromotor with hose (rotation +200o), for module FL-111 (FL-117)
3.3.4 XO FLOW reciprocating endo feature for WaveOne® Gold and RECIPROC® files
Enables activation of the reciprocating endo feature and a dedicated preset for one or more MX2 micromotor(s) installed in one XO FLOW unit.
The reciprocating movement makes the file glide smoothly along the root canal and reduces the risk of instrument fracture.
Reciprocating endo feature, software license, XO FLOW (IT-103)
Please note: Requires at least one micromotor module with hose, a MX2 micromotor and a CA ENDO contra-angle.
3.3.5 Endo contra-angle, Bien-Air CA ENDO
Especially designed for root canal treatment in continues as well as reciprocating mode. It is therefore fully compatible with standard endodontic files as well as with WaveOne® Gold files by Dentsply Sirona Inc. and RECIPROC® files by VDW (registered trademarks of Dentsply Sirona, Inc.).
The small head ensures optimal handling and improved visibility of the surgical field.
For other technical specifications please see CA ENDO (bienair.com).
Endo contra-angle, Bien-Air CA ENDO (HT-261)
Please note: Requires at least one micromotor module with hose, a MX2 micromotor and one software license for a reciprocating endo feature.
3.4 XO ODONTOSCALER
3.4.1 XO ODONTOSCALER module
- XO ODONTOSCALER for W&H/EMS compatible tips
- XO ODONTOSCALER for ACTEON compatible tips
- Power control:
- One-step or
- Variable in range 10 – 100 %
- Electronically controlled in the range: 20 – 60 ml/min ± 20%
- Membrane separated proportional solenoid valves
XO ODONTOSCALER module, supplied without scaler (FL-131)
Please note: The XO ODONTOSCALER must be ordered separately.
3.4.2 XO ODONTOSCALER (EMS compatible tips)
- Hose
- Handpiece for W&H / EMS compatible tips
- LED light
For technical specifications see here.
May be used with XO ODONTOSCALER module FL-131.
- 3 tips in stainless steel:
- 1 Universal prophylaxis tip, 1U with tip changer
- 1 Universal prophylaxis tip, 3U with tip changer
- 1 Periodontology tip, 1P with tip changer
-
1 nozzle cleaner
- 2 optical fibers
XO ODONTOSCALER LED piezo scaler with hose, handpiece and 3 tips (for W&H tips and tips with EMS compatible thread), for module FL-131 (FL-133)
- Supplied with:
- Hose
- Handpiece for ACTEON® compatible tips
- LED light
For technical specifications see here.
May be used with XO ODONTOSCALER module FL-131.
- 3 tips in stainless steel:
- 1 Universal prophylaxis tip, 1US with tip changer
- 1 Universal prophylaxis tip, 3US with tip changer
- 1 Periodontology tip, 1PS with tip changer
- 1 nozzle cleaner
- 2 optical fibers
XO ODONTOSCALER LED piezo scaler with hose, handpiece and 3 tips (for tips with ACTEON® compatible thread), for module FL-131 /FL-135)
3.5 XO ODONTOCURE CURING LIGHT MODULE
3.5.1 Composite light curing module
XO ODONTOCURE module for XO ODONTOCURE curing light.
Sound signal after 50 % of elapsed curing cycle and at the end of the cycle.
XO ODONTOCURE curing light module (FL-140)
Please note: The XO ODONTOCURE curing light must be ordered separately.
3.5.2 XO ODONTOCURE curing light
LED polymerization light featuring high output power and short curing time.
See technical specifications and accessories here.
XO ODONTOCURE curing light with hose, handpiece and light rod, for light curing module FL-140 (FL-141)
3.6 Intraoral camera
3.6.1 Intraoral camera module
The camera is connected to the unit’s computer and does not require an external PC.
Function:
- Live mode
- Live image on instrument window and Navigator (automatic opening of Camera app)
- Capture an image or a video using the foot control or buttons on the camera
- From the instrument control window is it easy to:
- Select camera mode
- Select video mode
- Rotate image
Intraoral camera module, supplied without camera (FL-150)
Please note: The intraoral camera must be ordered separately.
3.6.2 Dürr VistaCam iX HD Smart intraoral camera with hose
Function:
- Focus button on handpiece
- Capture an image or a video using buttons the handpiece
Supplied with:
- 20 hygienic protective covers.
See technical specifications here.
Dürr VistaCam iX HD Smart intraoral camera with hose, for intraoral camera module FL-150 (FL-151)
3.7 “BLIND” MODULE
Necessary if less than 6 instrument modules are fitted in the instrument bridge.
Number of blind modules per unit = 6 – number of instrument modules installed.
“Blind” module, (FL-190)
Please note: No “empty” instrument module slots in the bridge are allowed
2023-03-09/KS/TLT
4.1 SUCTION SYSTEM
- XO Ambidex suction hose holder with arm on XO Patient chair for high-volume and a saliva suction:
- Automatic repositioning of suction hoses after use
- Duo/Solo positions
- Position for right-handed as well as left-handed dentists
- Suction valves and filters:
- Check valves reducing suction noise
- Flushing system that automatically rinses the suction hoses when they are active
- Easy-to-clean filters
- Control system:
- Each suction hose starts/stops automatically when lifted out of/placed in the holder
- Additional Dashboard control of the suction hoses
- XO Suction disinfection
| The unit shall be connected to a suction machine with | High flow rate |
| Inner diameter of high-volume suction nozzle | 16 mm |
| Inner diameter of saliva suction nozzle | 7 mm |
| Mesh size suction filters | < 1 mm |
| Weighted noise level from the suction system through the connected cannulas at 0,5 meter from the cannula connection | < 65 dB (A) |
Head loss between the suction installation and the atmospheric end of the high-volume suction cannula:
| Flow [l/min] | Head loss [mbar] |
| 250 | 33,9 |
| 300 | 59,3 |
| 350 | 84,7 |
| 450 | 110,1 |
Suction for 2 hoses, XO Ambidex holder (FL-230)
Please note: Suction hoses and disinfection cartridges must be ordered separately.
Please note: XO FLOW cannot be supplied without suction.
4.2 SUCTION HOSES
- are very light and flexible
- have detachable and autoclavable suction nozzles
- L = 175 cm: Primarily to be used on a unit that is only used by right-handed operator
- L = 260 cm: Primarily to be used on a unit that is used by both right-handed and left-handed operators
2 suction hoses, L = 175 cm, for XO Ambidex holder, right-handed operator (XO-240)
2 suction hoses, L = 260 cm, for XO Ambidex holder, right- and left-handed operators (XO-241)
4.3 SUCTION DISINFECTION
XO Suction disinfection system disinfects, deodorizes and cleans the suction system.
Function:
- Automatic two-step procedure in the evening and in the morning (see details here)
- Quick replacement by the users of the disinfection cartridge holder through a service panel
For details concerning XO Suction disinfectant see here.
Please note: XO Suction disinfection cartridges must be ordered separately.
4.4 SUCTION INTERFACES
- a wet suction motor or
- with a dry suction motor
Wet suction interface, cuspidor valve (FL-233)
Dry suction interface, Dürr CAS 1 Combi-separator, amalgam separator (FL-232)
Please note: Either dry suction interface (FL-232) or wet suction interface (FL-233) must be selected.
XO FLOW is available without cuspidor and cup filler.
When the water disinfection instrument holder is not used, at patient tray is covering the drain hole in the top plate of the unit stand.
XO FLOW unit supplied without cuspidor and cup filler (FL-239)
As an option one or two tray holders may be fitted under the instrument bridge.
- The tray holders may accommodate:
- Standard norm trays with a height of 12– 23 mm
- XO Trays for carrying other types of instrument trays (in plastic for example)
Tray holder mounted under instrument bridge (FL-250)
XO Tray fits into the tray holder (FL-250):
- Dimensions of XO Tray are: 295,0 mm * 225,0 mm * 17,6 mm
XO Tray (FL-252)
The XO FLOW unit may be equipped with quick connections that are accessible through the service panels on the unit stand.
Quick connection air (FL-262)
Quick connection water (FL-263)
XO FLOW Operating light:
- 2nd generation LED technology
- Reflector yielding a shadow free light
- Long light arm and head fitted with 3 axes (allowing the light to be parallel to the viewing direction)
- Detachable handles
- Easy to clean protection screen
- Developed in accordance with the requirements of ISO 9680
Illuminance pattern contour lines corresponding to 10%, 50% and 75% of the maximum illuminance:
Specifications:
- Light intensity: 3.000 – 30.000 Lux at 70 cm distance
- Color rendering index (CRI): ~ 95 (ISO 9680 requires a CRI of 93 or greater for color matching)
- Color temperature: ~5.500 Kelvin
- Power consumption: 7 Watt (no cooling fan)
- Expected lifetime of LED: 10 years
Control:
- Automatic:
- On when the patient chair reaches a programmable position
- Off when the patient chair is activated towards til entry position
- Dashboard control
- Optional foot control
- Optional composite function with reduced light intensity
Stable X-ray adaptor integrated into the main pillar of the unit.
- X-ray adaptor, Ø 24.1 mm (FL-300)
- X-ray adaptor, Ø 25.1 mm (FL-301)
- X-ray adaptor, Ø 30.1 mm (FL-302)
- X-ray adaptor, Ø 32.1 mm (FL-303)
- X-ray adaptor, Ø 35.1 mm (FL-304)
- X-ray adaptor, Ø to be specified, < Ø 35.1 mm (FL-305)
Please note:
- The X-ray adaptor may not be used on XO units installed using the steel installation plate (XO-492)
- The weight of the X-ray unit head may not exceed 8 kg and the weight of the arm system may not exceed 17 kg
- The arm reach of the X-ray unit may not exceed 220 cm
Please note: XO units installed using steel installation plate may not be equipped with adaptor for intraoral X-ray unit.
| Dimensions (cm) L x W x H |
Gross weight (kg) | |
| Complete XO FLOW unit (without steel installation plate) |
165,0 x 80,0 x 190,0 | 280 – 300 |
| Unit stand | 120,0 x 72,1 x 140 | 150 – 170 |
| Instrument bridge and arm | 134,4 x 72,4 x 44,0 | 38 |
| Navigator and operating light | 134,4 x 72,4 x 44,0 |
32 |
| Patient chair | 165,0 x 80,0 x 56,0 | 65 |
| Steel installation plate | 100,0 x 80,0 x 4,0 | 51 (incl. pallet) |
All boxes are packed on pallets and wrapped before shipment.
JP 4279260
US 7,739,125
DE 60324334.7-08
FI 1603478
FR 1603478
IT 1603478
DK 1603478.
Other patents pending.